トップ > 運営・自治関係 > 質問フォーラム ( 前のトピック | 次のトピック )

PCB Types And Usages – Know About Main PCB

このフォーラムに新しいトピックを立てることはできません
このフォーラムではゲスト投稿が禁止されています

ツリー構造順で表示投稿の新しいものから

PCB Types And Usages – Know About Main PCB

msg# 1

前の投稿 - 次の投稿 | 親投稿 - 子投稿.1 .2 .3 .4 .5 .6 .7 | 投稿日時 2020-12-30 15:56

MayNa

投稿数: 15

In today’s electronic age, the emphasis is more on compactness. Manufacturers of electronic items want to present products that pack in a lot of functions but at the same time do not appear bulky or difficult to carry around. Gone are the days of electronic items being too large to handle.

Whether it is smart phones, computers or laptops and many other such items, they are all now available in small sizes. The best aspect is that there is no compromise on the functions and features they provide and the costs too have come down drastically. One of the main reasons for this is the evolution of the PCB or printed circuit board over the years.

Indeed, the main pcb is the basic base that holds wires of various components related to the functionality of a particular device. Most of the PCBs are generally made out of fiberglass and glass-reinforced resins that have traces of copper also within them. The various electronic devices also contain PCBs that are single or multi-layered. Computer graphic cards, motherboards are examples of multi-layered PCBs with up to a dozen layers. PCBs also come in various colors though green is the most common of them.

What are the specific advantages you can get out of main pcbs?
As mentioned above, the importance of keeping the device compact and at the same time confer the best of functionalities drives the modern electronic industry. When they use PCBs, the components within the PCB are connected through minute wires or traces inside the circuit board. They look neat and are also easier to work on in the future, as long as the PCB diagram is well drawn. The assembly is often computer aided and hence more can be fitted into the circuit board, making it compact.

This is in sharp contrast to the earlier devices when wires were longer, connected haphazardly and difficult to trace. It led to the devices becoming bulkier and difficult to manage.

The different parts of a main pcb
The PCB from the outside looks like a maze holding a number of connections, each leading from one point to the other and even interconnecting with each other. The thin lines are the replacements to the larger wires that were in use in earlier times. Then there are holes you can see in which different components can be placed depending on the need.

In the case of the microchip with 8 connections, there would be 8 holes on which the mounting of the components would be possible. This would result in a lot of saving of space and that is how today you have devices that are small to look at but can have many features and functionalities. You can find more information here; https://www.pcbmake.com/

The components that make the features and functionalities happen are the ones that are linked within the PCB. They include diodes, switches, transistors, microchips to name a few.

Maintenance of the main pcb
You have to be very careful in the handling of the PCB as it is delicate. Always wear rubber soles to prevent any conduction of static electricity, as it can cause harm to the PCB. You also need to first discharge any electricity within the body by touching metal for some seconds before you handle the PCB.

Companies like Atlanta PCB make products that have from 1 to even 90 layers. The company makes various types of PCBs as well as such as the heavy copper board, high frequency board, HDI, flex board and the like. The company besides being a leader in the local market also exports to various international markets and that is testimony to the quality of the products it makes.

The uses of the PCB are manifold within industries like electronics, medical and pharmaceuticals, automotive, telecommunication, aviation and so on.

投票数:0 平均点:0.00